Filter
Top Products
nüvi 900 Series Quick Start Manual 3
Step 3: Install the Battery
WARNING: This product contains a lithium-
ion battery. To prevent damage, remove the
unit from the vehicle when exiting or store it
out of direct sunlight.
1. Locate the rectangular lithium-ion
battery included in the product box.
2. Locate the metal contacts on the end
of the lithium-ion battery.
3. Insert the battery so that the metal
contacts on the battery match up with
the metal contacts inside the battery
compartment.
Metal contacts
Battery
4. Press the battery down into place.
5. Slide the battery cover back on until it
clicks into place.
Step 4: Mount the nüvi
1. Clean and dry your windshield with
a lint-free cloth. Remove the clear
plastic from the suction cup, and
clean it with a lint-free cloth.
2. Plug the vehicle power cable (with
integrated trafc receiver) into the
power connector on the cradle.
Cradle
Power cable
3. Snap the cradle onto the suction cup
arm.
Suction cup
mount
4. Place the suction cup on the
windshield.