Filter
Top Products
Garmin G1000 Pilot’s Training Guide
190-00368-00 Rev. D
6
GROUND LESSONS
Ground Lesson 3
POWER-UP, SELF-TEST, CHECKLIST
Objectives
Upon completion of this lesson, the pilot should be able to correctly identify proper alignment of the AHRS/ADC, complete a
system self-test and verify the database data.
Resources
• G1000 Pilot’s Guide
• G1000 PC-based simulator
Exercise 3.1: System Initialization
1. Is the aircraft required to remain stationary while the AHRS and ADC align?
2. Is there any warm-up time required for the engine instrumentation to be accurate?
3. What is the pilot action that should be taken if the MFD system self-test does not pass?
4. Where can you verify the effective dates of the Jeppesen database during the initial system start-up?
5. If the Jeppesen database is not current in the G1000, can the system still be used for IFR flight?
6. You are planning a flight to KAPA (Centennial Airport, Denver, CO) from KCOU (Columbia, MO). When you arrive at
the aircraft, you notice that the Jeppesen database data is out of date by 3 cycles (84 days).
6a. Can you make the flight under Instrument Flight Rules (IFR)?
6b. What enroute flight planning considerations do you have to make?
6c. What
destination flight planning considerations do you have to make?