Garmin GFL 10 Boating Equipment User Manual


  Open as PDF
of 10
 
 GFL10InstallationandCongurationInstructions
➊
➋
➋
➌
➍
➎
Connecting the GFL 10 Adapter to an
Existing NMEA 2000 Network
➊
GFL10adapter
➋
NMEA000device(notincluded)
➌
Dropcable(optional-notincluded)
➍
T-connector(oneincluded)
➎
ExistingNMEA000network
Conguring the GFL 10 Adapter
NOTICE: This section provides specic conguration information for the GFL 10 adapter
using your compatible Garmin display device. To access the NMEA 2000 conguration menu
on your display device, consult the documentation provided with your display device.
Conguring the NMEA 2000 Fluid Type
You can indicate the type of uid that is in the tank with which each GFL 10 adapter is
associated.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > N2K Fluid Type.
For other Garmin marine devices, select Cong > N2K Fluid Type.
3. Selectauidtype.
4. Select OK.
Conguring the Tank Number
If your boat has multiple uid tanks, you can indicate which tank each GFL 10 adapter is
associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Tank Number.
For other Garmin marine devices, select Cong > Tank Number.
3. Select a tank number.
4. Select OK.
•
•
•
•
 previous next