Garmin GPSMAP 2008 Fish Finder User Manual


 
GPSMAP
®
2008/2108 Owner’s Manual 45
ap p e n d i x
Acquisition Times:
Warm Start: Approx.15 seconds
Cold Start: Approx. 45 seconds
AutoLocate: Approx. 2 minutes
Update Rate: 1/second, continuous
GPS Accuracy:
Position: <33 feet (10 meters), 95% typical
Velocity: 0.1 meters/sec steady rate
WAAS Accuracy:
Position: <10 feet (3 meters), 95% typical
Velocity: 0.1 meters/sec steady rate
Dynamics: 6gs
Power
Power Source: 10-36 ± 0% VDC
Usage: 7.5 Watts max at 12 VDC
Fuse: AGC/3AG - 3.0 Amp
NOTE:THE RJ45 port (Garmin Network) is
used for Garmin Network devices such as Radar
andGSD22.TheBNCcoaxialcableportisto
connect to GPS module for satellite positioning,
of which frequency range is 1.57542 GHz. Both
portsoperatebelow60VDCandcannotwork
with non Garmin devices.
Alarms and Messages
The unit uses an on-screen message system to alert
you to unit operating characteristics. When a message
appears, press MENU to acknowledge the message.
Accuracy Alarm—the GPS accuracy has fallen
outside of user-set value.
AIS: Dangerous Target—shows the MMSI
(Maritime Mobile Service Identity) of the dangerous
target.
Alarm Clock—the alarm clock has sounded.
Anchor Drag Alarm—you have drifted out of the
specieddistancerange.
Antenna Input is Shorted—some part of the antenna
wiring is contacting the chassis.
Arriving At [Waypoint Name]—you arrived at the
destination waypoint. You can Stop Navigation when