Filter
Top Products
4 GPSMAP
®
2008/2108 Owner’s Manual
ge TT i ng sTa r T e d
—Press to return to the Home screen.
— Press to access additional settings and
conguration options; press to return to the
previous screen when indicated.
Acquiring GPS Satellite Signals
When you turn on the unit, the GPS receiver must
collect satellite data and establish its current location.
If the unit cannot establish a location, the Initialize
Position screen appears.
When the unit acquires satellite signals, the signal
strength bars at the top of the Home screen are green
. When the unit loses satellite signals, the green
bars disappear .
For more information about GPS, visit the Garmin
Web site at
www.garmin.com/aboutGPS.
Using Simulator Mode
Simulator Mode turns the GPS receiver off for
use indoors or for practice. The unit does not track
satellites in Simulator Mode.
CAUTION: Donottrytonavigateusing
Simulator Mode because the GPS receiver is
turned off. Any satellite signal strength bars
shown are only simulations and do not represent
the strength of actual satellite signals.
To turn on Simulator Mode
1. From the Home screen select Congure >
System > Simulator.
2. Select Setup to set speed, track control, and
position.