Filter
Top Products
Assigning an ID to a User Frequency
Frequencies in User (MEM) memory can be given an
alphanumeric identifier for your ease of use.
1. Press RCL. Turn the Large knob to the
User (MEM) frequencies.
2. Press MEM and hold it for about two
seconds. “Assign ID” and the frequency
to be given an ID will be displayed.
3. Turn the Small knob to select the
desired User frequency.
4. Press MEM. Six underscored spaces
will appear and the first one will flash.
5. Turn the Small knob to select
characters. Turn the Large knob to
move to another space. Continue to
select the desired characters.
6. Press MEM to save the displayed ID.
Turn the Large knob to “Done” and
press MEM.
The alphanumeric ID for a frequency is displayed only
when looking at user stored frequencies using the recall
(RCL) feature. The stored frequency is displayed
numerically once selected as the active or standby
frequency.
You can remove the ID for a frequency while retaining
the frequency in User memory by setting all characters
to underscores and pressing MEM.
8
Basic Operation