Filter
Top Products
ii VHF 100/200 Series Owner’s Manual
Introduction
VHF 100 VHF 100i VHF 200 VHF 200i
ATIS support ● ●
Private channel customization
(pre-set by your Garmin
®
dealer)
● ●
Multilingual user interface: English, French,
Italian, German, and Spanish
● ●
Manual Conventions
In this manual, when you are instructed to select an item using the Channel knob, turn the
channel knob to highlight the item, and the press the Channel knob to select the item.
Small arrows (>) in the text indicate that you should use the Channel knob to select
each item in order. For example, if the text indicates “select COMMUNICATIONS >
PROTOCOL,” you should complete these steps:
1. Turn the Channel knob to highlight COMMUNICATIONS, and then press the Channel
knob to select COMMUNICATIONS.
2. Turn the Channel knob to highlight PROTOCOL, and then press the Channel knob to
select PROTOCOL.
VHF 100/200 Series and GHS 10 Series Instructions
This manual provides instructions for the following units:
North American Models International Models
VHF 100 VHF 100i
VHF 200 VHF 200i
GHS 10 GHS 10i
Unless otherwise noted, the instructions for the VHF 100/200 Series radios and the GHS 10
Series handsets are the same.