Filter
Top Products
page | 10
Advanced Operation
LED Status
Basic Operation
The Power and Link LED indicators on the Sender and Receiver unit provide basic
information on the current status of the DVI ELR Extender over one CAT5.
The information, in the table below, applies to both the Sender and Receiver unit.
LED Status Description
Power Solid blue • Power connected to Sender /
Receiver unit.
Off • No power supplied to the Sender /
Receiver unit.
• Make sure each power supply
is connected to the Sender and
Receiver unit.
• Make sure that the outlet is “live”.
Link Solid green • Link integrity between the Sender
and Receiver unit is good.
• Source is connected to the Sender
unit.
• Display (or other sink device) is
connected to the Receiver unit.
Flashing
green
• No source is connected to the
Sender unit.
• Display (or other sink device) is not
connected to the Receiver unit.
Off • Link integrity is compromised.
• Check the cable between the Link
port on the Sender and Receiver unit.