Filter
Top Products
page | 11
DIP Switch Conguration
Advanced Operation
There is a bank of four DIP switches on the bottom of the Sender and Receiver unit.
Remove the piece of colored tape to reveal the DIP switch bank. These DIP switches
provide control over EDID management, HPD pass-through, power modes, and range
selection.
Default Settings
Description Sender unit Receiver unit
Default settings for Sender and Receiver unit.
• Internal EDID
• HPD is high
• Green mode is disabled
• Long-Reach mode is disabled
ON SAB
1 2 3 4
ON SAB
1 2 3 4
Bottom of Sender / Receiver unit
5V DC Link DVI In Power
Link
EXT-DVI-1CAT5-ELRS
Gefen
ON SAB
1 2 3 4
5V DC Link DVI In Power
Link
EXT-DVI-1CAT5-ELRS
Gefen
ON SAB
1 2 3 4