Filter
Top Products
Component Identification
6 3A1211M
Component Identification
Key:
Air Motor Kit Components
A Air valve
B Pilot valve (bottom pilot valve is out of view)
C Top cover
D Bottom cover
E Manifold
F Ground screw
Lift Ring, Shrouds, and Fittings
G Air inlet, 1/2 in. npt(f)
H Air outlet, 3/4 in. npt
J Lift Ring
K Upper Shroud
L Lower Shroud (out of view)
Grounding
See FIG. 1. Connect a ground wire (Graco PN 238909)
to the ground screw (12) on the bottom cover of the air
motor, under the shroud. Connect the other end of the
ground wire to a true earth ground.
FIG. 1. SaniForce Air Motor components
A
H
G
B
F
C
ti16221a
ti16222a
J
K
D
E
Model
24R491
ti21099a
The equipment must be grounded. Grounding reduces
the risk of static and electric shock by providing an
escape wire for the electrical current due to static build
up or in the event of a short circuit.