Filter
Top Products
3307212
Models
Spring Operated Fluid Regulators
Part No. Series Maximum Fluid Inlet
Pressure, psi (kPa, bar)
Regulated Pressure
Range, psi (kPa, bar)
Gauge Gauge Pressure
Range,
psi (kPa, bar)
214895 H 250 (1800, 18) 5–100 (34–700, 0.3–7) No n/a
214706L H 250 (1800, 18) 5–100 (34–700, 0.3–7) Yes (see 0–100 (0–700, 0–7)
below)
24A082 { A 250 (1800, 18) 5–100 (34–700, 0.3–7) Yes (see 0–100 (0–700, 0–7)
below)
255374 { B 250 (1800, 18) 5–100 (34–700, 0.3–7) Yes (see 0–200 (0–1400, 0–14)
below)
217314L F 250 (1800, 18) 20–160 (140–1100, 1.4–11) Yes 0–300 (0–2100, 0–21)
221118L E 250 (1800, 18) 20–160 (140–1100, 1.4–11) No n/a
{ ISO pitch thread inlet and outlet. Not compatible with US standard pitch.
Fluid housing coated with PTFE polymer.
L These models are and certified.
The fluid supply system’s main line pressures often exceed the pressure range of the gauge supplied
with regulators 214706, 255374, and 24A082. Exposing this gauge to excessive pressure can damage
the gauge, causing inaccurate readings and the needle will not return to zero.
This damage is not covered by the Graco warranty.
Air Operated Fluid Regulators
Part No. Series Maximum
Regulated
Air Pressure,
psi (kPa, bar)
Maximum Fluid
Inlet Pressure,
psi (kPa, bar)
Regulated Pressure
Range,
psi (kPa, bar)
Gauge Gauge Pressure
Range,
psi (kPa, bar)
214980 } F 30 (210, 2.1) 250 (1800, 18) 0–30 (0–210, 0–2.1) Yes 0–30 (0–210, 0–2.1)
244375 B 100 (700, 7) 250 (1800, 18) 5–100 (34–700, 0.3–7) No n/a
} Regulated air pressures from 30–100 psi (210–690 kPa, 2.1–6.9 bar) may be used if a 100 psi rated gauge is
installed.