14423-INS-LAB-RevD11 20
6 OPERATION
PROBEOPERATION
RemovingtheProbefromthePocketDoppler
s NOTICE:Donotdragordroptheprobe.Donotdis-
connecttheprobefromthePocketDoppler.
1. The probe is installed in Pocket Doppler probe frame
(left picture above). Hold the Pocket Doppler main unit
with one hand and hold the top of the probe with the
other hand.
2. Gently remove the top of the probe from the Pocket
Doppler probe frame (center picture above).
3. Remove the entire probe from Pocket Doppler probe
frame (right picture above).
PlacingtheProbeinthePocketDoppler
s NOTICE:Donotdragordroptheprobe.Donotdis-
connecttheprobefromthePocketDoppler.
1. Hold the Pocket Doppler main unit with one hand and
hold the probe with the other hand.
2. Gently guide the middle of the probe into the Pocket
Doppler's probe frame (center picture above).
3. Gently replace the top of probe entirely into the Pocket
Doppler's probe frame (left picture above).