Filter
Top Products
Page 4SKU 92372 For technical questions, please call 1-800-444-3353.
Unpacking
When unpacking, check to make sure the parts listed on page 7 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Assembly / Installation
WARNING: The trailer tongue must be square or rectangular in profile for this Jack to
mount properly. A rounded tongue will allow the Jack to rotate to the side
causing the trailer to fall suddenly, causing potentially serious personal or
property injury.
NOTE: Do not drill holes or otherwise damage the trailer tongue when installing this
Jack. Failure of the trailer tongue may result.
NOTE: Installing this Jack is most easily done with the Trailer mounted on the towing
vehicle hitch.
FIGURE 1
FIGURE 2
See detail inset in FIGURE 2.
Handle (1)
Tire (18)
Hardware Set (19)
(1 of 4)
Mounting Bar (20)
(1 of 2)
Inner Tube (8)
Outer Tube (7)
Swivel Plate (6)