Filter
Top Products
RF SPA REMOTE BASIC BUTTON FUNCTIONS
WIRELESS REMOTE OPERATION
TEMP UP BUTTON - Increases temperature (same increments as when changing
the temperature from the spa side control panel).
TEMP DOWN BUTTON - Decreases temperature (same decrements as when
changing the temperature from the spa side control panel).
SPA BUTTON - Switches the valve between spa and pool, 24 hour timeout
when in the spa position, turns the filter pump on in the spa position.
JETS/BLOWER BUTTON - Turns the jets and blower on and off, 2 hour
timeout. The sequence is: Jets, Blower, Jets and Blower, Off.
If there is no blower; this button turns the jets on and off.
LIGHTS BUTTON - Switches the light(s) between high, medium, and low
intensity on 120V systems only. Turns light(s) on/off on low voltage lighting
system. 12 hour timeout.
AUX 2 BUTTON - Turns the feature on and off; 12 hour timeout.
HEATER BUTTON - Enables the heater for heating whichever position the valves are in, whether it be
pool or spa.
AUX 4 BUTTON - Optional Pool Light:
A. Controls the optional pool lighting circuit. The 1st press turns on the light.
B. The button is pressed again AFTER 5 SECONDS, the light turns off.
C. If the button is pressed again BEFORE 5 SECONDS, the Aux 4 option will operate.
D. The next press stops the Aux 4 option and the next turns the light off. 12 hour timeout.
On/Off Light Option:
The 1st press turns the light on. The 2nd press turns the light off; 12 hour timeout.
RF MASTER PANEL
Refer to the Master Control Panel basic function button operation
instructions in your Hayward Operating Instructions or User’s
Guide.
To TURN ON the remote panel, push the TEMP DOWN button.
The remote panel will turn off automatically 3 minutes after the last
button press.
Display will flash “SIG” when the main control is not turned on,
when the remote is too far away, or when there is a large metallic
object between the remote and the main.
Display will flash “BAT” when the battery is low.
4