Filter
Top Products
• 6
Remove the main and jib halyard lines from the ropes
bags. Unroll the main halyard wire that is secured at the
head of the mast. Using a bowline knot, secure the main
halyard line to the thimble at the end of the halyard wire.
Now, secure both ends at the base of the mast.
Mast and rigging
MAST
1
Remove all the wires from the wires bag and unroll them. Ensure that all
twists are removed.
Locate the 8 mm tang shackle and shackle the five wires to the mast
tang, as per photograph. Ensure that the shackle is tightened securely.
2
1. Shrouds
2. Pigtail, forestay, jib halyard/
(for Turbo model only)
1
1
2
With the base of the mast facing towards the front of the boat, lay
the mast on top of the boat. (place some pading under the mast
to prevent scratching).
Find the package containing the stay adjusters, twist toggles, cle-
vis pins and split rings. Assemble by pinning the twist toggle into
the bottom of the stay adjuster.
3