Filter
Top Products
Installation Instructions Page 3 of 6
E-INS-MX5BELTBATT-B-ARC MX5 Belt Battery System Installation Instructions
MX5 Belt Battery
The Belt Battery supplies external power for the MX5 hand held computer and power for the
optional heater in the MX5.
Before charging the Belt Battery, allow the temperature of the Belt Battery to stabilize at a
temperature range between 0°C and 40°C (32°F and 100°F). Optimum temperature will allow the
battery to charge to full capacity.
Figure 1 Belt Battery Figure 2 Cable - MX5 to Belt Battery
Warning: Do not short the center pin and the shell of the AC charging bay.
1 Belt 4 Belt XLR Connector
2 Battery in Battery Case 5 Belt Battery Cable adapter cable
3 AC Charging Bay
Note: Do not wear the the battery belt charger when it is connected to AC Power. Disconnect
the MX5 from the Belt Battery when the battery belt charger is to be connected to AC
Power.