Filter
Top Products
Installation Instructions Page 4 of 6
E-INS-MX5BELTBATT-B-ARC MX5 Belt Battery System Installation Instructions
1. Push the the MX5 Adapter cable into the battery belt XLR cable end until they click together.
Figure 3 Connect Belt Battery Cable and MX5 Cable
2. Place the belt strap around the waist. Adjust the belt slider until it is snug but comfortable.
Note: LXE does not recommend using the belt strap as a shoulder strap.
3. Place the battery pack on the hip.
Figure 4 Connect Cable Assembly to MX5 Port
4. Connect the MX5 end of the cable to either port 1 or port 2 on the MX5.
5. The green battery charging LED on the MX5 illuminates, either flashing or solid indicating valid
external power is installed. If not, ensure the Belt Battery is fully charged.
Figure 5 Battery Charging LED on the MX5