Humminbird 160pt Fish Finder User Manual


 
Fish ID+
TM
(SetUp Menu)
(Setting Saved in Memory)
Makesurethat the SetUp menu isselected,then press the POWER-MENUkey
untilFISHID+
TM
appears.SelecteitherOff to view “raw”sonar returnsor On to
view Fish symbols. Fish ID+
TM
uses advanced signal processing to interpret
sonarreturns, andwill display a Fish Symbolwhen very selectiverequirements
are met. A select number of possible fish returns will be displayed with their
associated depth. (On, Off, Default = On)
Scroll through all SetUp menu choices to exit the SetUp menu.
NOTE: Returnsfromthe 200kHznarrow beam are shownwithshadedfishsymbols
while the 83 kHz wide beam returns are displayedwith hollow fishsymbols.
NOTE: Hollow fish symbols are not available on 200 kHz Single Beam sonar units.
Bottom View (SetUp Menu)
(Setting Saved in Memory)
Make sure that the SetUp menu is selected, then press the POWER-MENU
key until BOTTOM VIEW appears. Bottom View selects the method used to
represent the bottom and structure on the display. (Structure ID, Black,
WhiteLine, Inverse, Default = Inverse)
Scroll through all SetUp menu choices to exit the SetUp menu.
RawSonar,
FishID+
TM
Off
Single Beam
200kHz
Narrowbeam,
FishID+
TM
On
Dual Beam
RawSonar,
FishID+
TM
Off
200kHz
Narrowbeam,
FishID+
TM
On
83kHz
Widebeam,
FishID+
TM
On
25