Filter
Top Products
• If the transom is behind the propeller(s), it may be impossible to find an
area clear from turbulence, and a different mounting technique or
transducer type should be considered, such as an Inside the Hull
Transducer.
• If you plan to trailer your boat, do not mountthe transducer too close to
trailer bunks or rollers to avoid moving or damaging the transducer
during loading and unloading of the boat.
• If high speed operation is critical, you may want to consider using an
In-Hull transducer instead of this Transom Mount transducer.
NOTE: The hydrodynamic shape of your transducer allows it to point straight down
withoutdeadriseadjustment(Figure12).
NOTE:Ifyoucannotfinda transommountlocationthatwillworkforyourhigh-speed
application,findan In-HullTransducer bycontactingourCustomer ResourceCenterat
either1-800-633-1468orbyvisitingourwebsiteatwww.humminbird.com.
Figure12
Deadrise Angle
15”
Find aturbulence-free location atleast 15” fromthe propeller(s)
and notin line withtrailer bunks orrollers. (Figure 11).
Level
10
Transom Transducer Installation