Filter
Top Products
30
Total Screen Update - when you change any menu settings that affect the Sonar
View, the view will update immediately (i.e. you don’t have to exit the menu to apply
the change to the screen). For instance, by switching between "Inverse" and
"Structure ID®" from the X-Press
TM
menu it is possible to alternate quickly between
the two viewing methods.
Start-Up Options Menu
Press the MENU key when the Title screen is
displayed to access the Start-Up Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position
the cursor, then the RIGHT Cursor key to select one of
the following choices. If you wait too long, the system
will default to whichever menu mode happens to be
highlighted:
• Normal
• Simulator
• System Status.
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on the water operation with a transducer connected. In
addition, your 300 Series
TM
Fishing System uses advanced transducer detection methods
to determine if a transducer is connected. If a functioning transducer is connected,
Normal operation will be selected automatically at power up and your 300 Series
TM
Fishing System can be used on the water.
Exit Normal operation by powering your 300 Series
TM
Fishing System off.
Start-Up Options Menu