Humminbird Matrix 17 Fish Finder User Manual


 
2
How Sonar Works
Sonar technology is based on sound waves. The Matrix Fishing System uses sonar to
locate and define structure, bottom contour and composition, as well as depth
directly below the transducer.
Your Matrix Fishing System sends a sound wave signal and determines distance by
measuring the time between the transmission of the sound wave and when the
sound wave is reflected off of an object; it then uses the reflected signal to interpret
location, size, and composition of an object.
Sonar is very fast. A sound wave can travel from the surface to a depth of 240 ft
(70 m) and back again in less than ¹⁄₄ of a second. It is unlikely that your boat can
"outrun" this sonar signal.
Your Matrix Fishing System will either have Single Beam, DualBeam PLUS™ or
QuadraBeam™sonar. Find the correct sonar description that applies to your unit.
1
Single Beam Sonar
Your Matrix 10, 12 or 20 uses a 200 kHz single beam sonar
system with a 20° area of coverage. Depth capability is
affected by such factors as boat speed, wave action, bottom
hardness, water conditions and transducer installation.
DualBeam PLUS™ Sonar
Your Matrix 17 or 27 uses a 200/83 kHz DualBeam PLUS™
sonar system with a wide (60°) area of coverage. DualBeam
PLUS™ sonar returns can be blended together, viewed
separately or compared side-by-side. DualBeam PLUS™ is ideal
for a wide range of conditions - from shallow to very deep
water in both fresh and salt water. Depth capability is affected
by such factors as boat speed, wave action, bottom hardness,
water conditions and transducer installation.
QuadraBeam™ Sonar
Your Matrix 37 Fishing System uses QuadraBeam
TM
sonar.
QuadraBeam
TM
sonar provides an extremely wide 90° area of
coverage. QuadraBeam
TM
starts with two 45° 455 kHz beams
for a continuous 90° of uninterrupted side to side coverage to
160 feet. These Side Structure locating beams reveal fish and
structure to the left and right of your boat near the bottom.
For structure directly below your boat, QuadraBeam
TM
uses
DualBeamPLUS™ technology.