Filter
Top Products
CASE ASSEMBLY
INTRODUCTION / ATTACHING THE CONTROL HEAD
Introduction to CASE ASSEMBLY
The Piranha Portable is available in several different
configurations. You may have purchased the portable
case complete with a Piranha unit ready for opera-
tion.
A Piranha control head you already own may also be
used with the portable case.
The Piranha Portable contains the portable case, a
removable power cable, transducer with 15 feet of
cable, the suction cup transducer mounting kit, and various connecting hardware.
This manual serves for all applications, so there may be some minor differences
between the manual and the actual hardware included, depending on the configura-
tion you purchased.
Piranha Portables are sold with the Piranha 1, 2, 2x, 4, 4x Control heads. The PTC
Portable Piranha kit is adaptable to all Piranha fishfinders.
PIRANHA PORTABLE CASE ASSEMBLY
Case Assembly Overview
In the following step-by-step procedures the following portable case assembly tasks
are described, and must be
performed in order:
1. Attaching the control head
2. Assembling the transducer
mount
3. Attaching the transducer
cable
4. Installing the batteries.
2
Control Head
Gimbal Knob
Rubber Cable Cover tab
Washers
Thumbknob
Pivot Knuckle
Cable Cover
and
Non-skid
base.