Filter
Top Products
Once Triplog is enabled, pressing MENU to bring the Triplog menu on-screen now shows an
additional option. “Reset”. By selecting Reset, the timer and distance log resets to 0 and the
Triplog will begin to calculate elapsed time, distance traveled, and average speed from the time of
reset.
Triplog can be used with any view, even Wide Side. When Triplog is enabled in Monster Digits
view, the Triplog information will displace the water temperature readout.
To disable Triplog, press the MENU button until the Triplog menu is on screen. Use the UP
ARROW to select Hide and let the menu time out. The Triplog continues to operate and log time
and distance even when it is not visible on-screen. The Triplog resets at power-off.
Options
The Options Menu is actually a series of linked menu functions which are used initially to select
user preferences. Once user preferences are selected, it is unlikely that these functions need to
be accessed during the normal operation of the product.
The options menu works differently than other menu functions in that all of the options must be
cycled through in order to return to normal operation. There are seven Option menus: Contrast,
Units, Fish ID, Numerical size, Transducer, Display speed, and Reset.
Press MENU until the Options menu is on-screen. There are two choices, Hide (Factory Setting)
and Show. Use the DOWN ARROW to highlight Show and the first Options menu appears.
Contrast
The Contrast function allows the user to control the level of contrast of the LCD display. The Wide
Portrait will automatically adjust the display contrast to compensate for changing ambient
temperatures; however some situations may occur where manual adjustment will provide a higher
level of contrast.