Filter
Top Products
achieved by viewing only one side. To change the view, simply press the VIEW button repeatedly
until the desired view is on-screen. The Down view is similar to the traditional view when using
the standard transducer, however there is no Tri-beam information available such as fish location.
When operating in Wide Side mode, the range must be adjusted manually, since the bottom is
often not visible on-screen. Ranges of 15, 30, 60, and 120 feet are available. Also, Zoom is not
possible in any side looking views, and the Zoom menu is not available.
Experiment with the Wide Side transducer while operating it in a familiar area to learn how to
maximize use of the information displayed. Remember that if you are using a trolling motor
mount, the information displayed is controlled by the direction the trolling motor is pointing, not
necessarily the direction the boat is traveling.
To return to normal “down” operation using the Tri-beam transducer, simply change the switch
setting if you are using a transducer switch, or reconnect the Tri-beam transducer. The Wide
Portrait will reconfigure the screen automatically.
SPECIFICATIONS
Operating Frequency…………………………………………………200/455 kHz
Power Output (200 kHz)……………………………………………..300 Watts (RMS)
………………………………………………………………………..2400 Watts (Peak to Peak)
Power Output (455 kHz)……………………………………………..300 Watts (RMS)
………………………………………………………………………..2499 Watts (Peak to Peak)
Area of Coverage…………………………………………………….90 degrees at –10 db
Power Requirement…………………………………………………. 10 - 16 VDC
Display…………………………………………………………………Super Twist LCD
LCD Matrix……………………………………………………………128 x 128
Viewing Area………………………………………………………….4.00” H x 3.00 V
Mounting………………………………………………………………Quick Disconnect Mount
Unit Size ………………………………………………………………7 ¾” H x 7 7/8” W x 4 ¼” D
Transducer (Standard)…………………………………………………XT-6-TB-90
Transducer Cable Length……………………………………………...20 feet
Depth Ranges………………………………………………………….15, 30, 60, 120, 180, 240, 360,
480,
& 600 (feet)
Zoom Ranges………………………………………………………….7 ½, 15, 30, & 60 (feet)