Filter
Top Products
R1600.EXE 19
R1600.EXE
(LI-1600 Data)
General Information
R1600.EXE will reformat an LI-1600 data file that was output using
the 2-line format which the instrument produces. The R1600
program will also add an offset time stamp to any LI-1600 data file,
if desired, which will be added to the #S (time since instrument turn
on, in seconds) values to produce a real time identifier. R1600
creates a file that has all the channels listed horizontally, and sorted
by time vertically. For example:
Source File...
#C1000E+1 #S2991E+1 DR3500E-3 CD4667E-2 TR5234E-1 QU6234E+0
HM7234E+1 LT8234E+2 CT9234E+3 FL1034E+4 PR1162E+2 AP1200E+0
Dest. File...
#C #S DR CD TR QU...
00:00:02 1.000 2.000 0.00035 0.004667 0.05234 0.6234
00:00:26 2.000 26.00 68.59 0.01458 0.3550 0.000
00:01:40 3.000 100.0 453.9 0.002203 0.05356 0.000
To run the r1600 program, log onto the proper drive and at the DOS
prompt type
r1600 <enter>.
A help file showing the proper command format automatically
appears.
To reformat a LI-1600 data file, type
r1600 <source file> <destination>