Filter
Top Products
10
2
OPERATION
DUser set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “cus-
tomize” transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q While pushing and holding []and [], push [POWER]
to enter user set mode ON, allowing you to set seldom-
changed settings.
w Push and hold [P0] to select the appropriate item. Then,
push []or []to set the desired level/mode.
- Available set mode functions;
•Backlight : OFF, Dim, Auto or ON
•Beep : OFF or ON
•SQL Level : 0 to 255
•AF Min level : 0 to 255
e Push [POWER] (or push and hold [P0]) again to exit set
mode.
User set mode is also available via a programmable key.
Please refer to p. 6 [SET] section.
IC-F110_F210_GEN.qxd 02.12.11 4:25 PM Page 10 (1,1)