Icom IC-F9511HT Marine Radio User Manual


 
5
1
PANEL DESCRIPTION
PRIO A/B KEYS
Push to select Priority A or Priority B channel.
Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for
1 sec. to assign the operating channel to the Priority A or
Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1, 2, 3 or 4.
MONI KEY
Push to mute and release the CTCSS (DTCS), 2-tone,
NAC or Talkgroup ID squelch mute. Open any squelch/de-
activate any mute while pushing this key.
•Dependingonthepre-setting,the‘Audible’(unmute)condition
may automatically return to the ‘Inaudible’ (mute) condition, after
a specified time period.
Depending on the pre-setting, pushing and holding this
key for 1 sec. cancels the scan.
TALK AROUND KEY (Conventional operation only)
Turn the talk around function ON or OFF.
•Thetalkaroundfunctionequalizesthetransmitfrequencytothe
receive frequency for transceiver-to-transceiver communication.
PUBLIC ADDRESS KEY
Push to activate the Public Address (PA) function for voice
amplification. When the PA function is activated, the audio
output can be controlled from the transceiver separately with
[CH Up] or [CH Down].
•Thisfunctionisavailablewhentheexternalunit,suchasanaudio
amplifier, speaker, etc. is additionally connected. (p. 16)
•Pushthiskey,thenspeakintothemicrophonewhilepushingand
holding [PTT].
NOTE: “PA/RX Speaker” setting should be turned OFF by
your dealer with the CS-F9010/F9510
c lo ni n g so f t w ar e
to activate the PA function. Ask your dealer for details.
RX SPEAKER KEY
Push to turn the RX speaker function ON or OFF.
When the RX speaker function is turned ON, the received
audio can be heard via the external speaker.
•Thisfunctionisavailablewhentheexternalspeakerisadditionally
connected. (p. 16)
•Thisfunctionisusefulwhenyouareoutofthevehicle.
•Theaudiooutputlevelislinkedtothetransceiver’svolumecontrol.
DO NOT operate this key with this transceiver. Otherwise
no audio may be emitted.
LOCK KEY
Push and hold to electronically lock all programmable keys
except the following:
[Moni], [Light], [Lock], [Emergency], [Surveillance] and [OPT 1/2/3].