Filter
Top Products
2
PANEL DESCRIPTION
2
■ Front panel
q POWER SWITCH [POWER]/[ ] (p. 8)
Turns power ON and OFF.
•The standby screen appears for 90 sec. while warming
up the magnetron.
• The initial screen appears with a beep after the power
has been turned ON.
w TRANSMIT/SAVE SWITCH [TX (SAVE)]
/[ ]
➥Push to toggle between the TX mode and the
standby mode. (p. 9)
➥Push and hold for 1 sec. to turn the power save
function ON. The radar for TX interval scan is
fixed at 10 revolutions. (p. 12)
•Select the save time in INT. SETTING menu.
e RANGE UP/ DOWN SWITCHES [+]/[–]
/[ ]/[ ] (p. 9)
Push [+] to increase the screen range.
Push [–] to decrease the screen range.
r UP, DOWN, LEFT, RIGHT KEYS [
ÙÙ ÚÚ
ΩΩ ≈≈
]]
Set the EBLs, VRMs, alarm area, ATA target, etc.
according to the key pushed.
Use the [
ÙÙ
] [
ÚÚ
] to select menu item and [
ΩΩ
] [
≈≈
] to
set the item.
Using the [
ÙÙ
ΩΩ
]/[
ÙÙ
≈≈
] or [
ÚÚ
ΩΩ
]/[
ÚÚ
≈≈
] combination
allows you to move the cross line cursor to the
upper (or lower) left or right.
t TRAILS SWITCH [TRAILS]/[ ] (p. 12)
Push to toggle the trail function ON and OFF. This is
useful for watching other ship’s tracks, approx. rela-
tive speed etc.
•Trail Time can be set in VIDEO menu.
y ZOOM FUNCTION [ZOOM]/[ ] (p. 11)
Push [TARGET]/[ ] and [TRAILS]/[ ] si-
multaneously to toggle the ZOOM function ON and
OFF. ZOOM function expands the target to 2 times
normal.
•Move the cursor to the target, then turn the function ON.
•The screen zooms around the middle of the cursor and
own ship.
•This function is not available on
1
⁄8 and 32 NMor above
ranges.
u MODE SWITCH [MODE]/[ ]
Push to select one of Head-up (H UP), Course-up
(C UP), North-up (N UP) or True motion (TM)
screens.
•The North-up and Course-up screens can be selected
only when a bearing data format is connected. (p. 39)
•TM screen requires bearing data and LOG or position
data. (p. 39)
•TM screen is not available at 32 NM or above range.
i OFF CENTER FUNCTION [OFF CENT]/[ ]
(p. 10)
Push [ALM]/[ ] and [MODE]/[ ] simulta-
neously to turn the OFF CENTER function ON or
OFF.
•This function is available for 24NM or shorter range se-
lection.
MOB
GAIN
SEA
RAIN
POWER
TX
SAVE
TARGET
TRAILS
ZOOM
ALM
MODE
OFF CENT
EBL1
VRM1
PI
BRILL MENU
HL OFF
EBL2
VRM2
MARINE RADAR
TX
SAVE
TARGET TRAILS
MODEALM
+
-
MOB
MENU
EBL2
VRM2
EBL1
VRM1
BRILL
ZOOM
OFF CENT
PI
HL OFF
GAIN
SEA
RAIN
POWER
e
r
q
w
t
u
o
!1
y
i
!2
!3
!4
!5
!6
!7
!8
!9
@0
e
r
q
w
t
u
o
!1
y
i
!2
!3
!4
!5
!6
!7
!8
!9
@0
!0 !0
Control panel (English) Control panel (Chinese)
MR-1000R2_T2.qxd 04.2.24 10:22 Page 2