Filter
Top Products
7
8
5) If you suspect that the optics have been contaminated, alternate between
blasting with clean dry compressed air and flushing with methanol to remove
particles of dirt.
Electrostatic Discharge Precautions
Electrostatic discharge (ESD) can cause damage to your add-in modules. Always observe the
following precautions when installing or handling an add-in module or any board assembly.
1) Do not remove unit from its protective packaging until youre ready to install it.
2) Wear an ESD wrist grounding strap before handling any module or component. If you do
not have a wrist strap, maintain grounded contact with the system unit throughout any
procedure requiring ESD protection.
WARNING! Integrated circuits and fiber optic components are extremely
susceptible to electro-static discharge damage. Do not handle these components
directly unless you are a qualified service technician and use tools and
techniques that conform to accepted industry practices.
3) Hold boards by the edges only; do not touch the electronic components or gold
connectors.
4) After removal, always place the boards on a grounded, static free surface, ESD pad or in a
proper ESD bag. Do not slide the board over any surface.
Technical Support
Tel: (949) 465-3000; (800) 624-1070 (in U.S.);
+32-16-550880 (Europe)
FAX: (949) 465-3020
E-Mail: techsupport@imcnetworks.com
Web: www.imcnetworks.com
Specifications
Environmental
Operating Temperature: 32° - 104° F (0° - 40° C)
Storage Temperature: 22° - 160° F (-6° - 71° C)
Humidity: 5 - 95% (non-condensing)
Power
AC Input Load: 100/240 ±10% VAC ~ 50/60 Hz, 0.1/0.05A
Fiber Optic Specifications
For fiber optic specifications, visit our Web site at
www.imcnetworks.com/fopower.htm.
Warranty
IMC Networks warrants to the original end-user purchaser that this product, EXCLUSIVE OF SOFTWARE,
shall be free from defects in materials and workmanship under normal and proper use in accordance with
IMC Networks' instructions and directions for a period of six (6) years after the original date of purchase. This
warranty is subject to the limitations set forth below.
At its option, IMC Networks will repair or replace at no charge the product which proves to be defective
within such warranty period. This limited warranty shall not apply if the IMC Networks product has been
damaged by unreasonable use, accident, negligence, service or modification by anyone other than an
authorized IMC Networks Service Technician or by any other causes unrelated to defective materials or
workmanship. Any replaced or repaired products or parts carry a ninety (90) day warranty or the remainder
of the initial warranty period, whichever is longer.
To receive in-warranty service, the defective product must be received at IMC Networks no later than
the end of the warranty period. The product must be accompanied by proof of purchase, satisfactory to
IMC Networks, denoting product serial number and purchase date, a written description of the defect and a
Return Merchandise Authorization (RMA) number issued by IMC Networks. No products will be accepted
by IMC Networks which do not have an RMA number. For an RMA number, contact IMC Networks at
PHONE: 800-624-1070 (in the U.S.) or 949-465-3000 or FAX: 949-465-3020. The end-user shall return
the defective product to IMC Networks, freight, customs and handling charges prepaid. End-user agrees to
accept all liability for loss of or damages to the returned product during shipment. IMC Networks shall
repair or replace the returned product, at its option, and return the repaired or new product to the end-
user, freight prepaid, via method to be determined by IMC Networks.
IMC Networks shall not be liable for any costs of procurement of substitute goods, loss of profits, or any
incidental, consequential, and/or special damages of any kind resulting from a breach of any applicable
express or implied warranty, breach of any obligation arising from breach of warranty, or otherwise with
respect to the manufacture and sale of any IMC Networks product, whether or not IMC Networks has been
advised of the possibility of such loss or damage.
EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, IMC NETWORKS MAKES NO OTHER
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS IMC NETWORKS PRODUCT,
INCLUDING WITHOUT LIMITATION ANY SOFTWARE ASSOCIATED OR INCLUDED. IMC NETWORKS
SHALL DISREGARD AND NOT BE BOUND BY ANY REPRESENTATIONS OR WARRANTIES MADE BY ANY
OTHER PERSON, INCLUDING EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF IMC
NETWORKS, WHICH ARE INCONSISTENT WITH THE WARRANTY SET FORTH ABOVE. ALL IMPLIED
WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY LIMITED TO THE DURATION OF THE EXPRESS WARRANTY STATED ABOVE.
Every reasonable effort has been made to ensure that IMC Networks product manuals and promotional
materials accurately describe IMC Networks product specifications and capabilities at the time of
publication. However, because of ongoing improvements and updating of IMC Networks products, IMC
Networks cannot guarantee the accuracy of printed materials after the date of publication and disclaims
liability for changes, errors or omissions.
Federal Communications Commission Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A computing device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which the user will be required to
correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set
out in the Radio Interference Regulation of the Canadian Department of Communications.
Le présent appareil numérique német pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par le
ministère des Communications du Canada.
19772 Pauling Foothill Ranch, CA 92610-2611 USA
TEL: (949) 465-3000 FAX: (949) 465-3020
www.imcnetworks.com
© 1999 IMC Networks. All rights reserved.
The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors that may
appear in this document. McBasic and McBasic 10/100 are trademarks of IMC Networks. Specific brands and product names may be
trademarks and are the property of their respective companies.
Document Number 55-80216-00 B0 November 1999