Ingersoll-Rand 5597 Marine Sanitation System User Manual


 
E2011 CCN 20083093
(800) 495--0276 D FAX (800)892--6276
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET BRYAN, OHIO 43506
www.ingersollrandproducts.com
OPERATOR’S MANUAL 559X
RELEASED: 2-3-03
REVISED: 9-27-11
(REV.
H)
CHOP-CHECK GREASE PUMP
2” AIR MOTOR
50:1 RATIO
0 - 7500 P.S.I. RANGE
INCLUDE MANUAL: S- GENERAL INFORMATION (PN 97999-
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING
5596, 5597, 5598, 5599
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
UseonlygenuineIRR replacementpartstoassurecompatible pres-
sure rating and longest service life.
637385 Pump Rebuild Kit. Includes the necessary soft parts for
normal service of the entire pump.
SPECIFICATIONS
Model Series 559X..................
Type Air Operated, Chop-Check Grease Pump.............
Ratio 50:1........................
Air Motor Diameter 2” (5.08 cm).............
Stroke 3” (7.62 cm)......................
Air Inlet (female) 1/4 - 18 N.P.T.F. - 1..............
Material Outlet (female) 3/8 - 18 N.P.T.F. - 1
...........
Pump Construction Carbon Steel...........
Dimensional Data see chart..............
Weight see chart.......................
PERFORMANCE
Air Inlet Pressure Range 0 - 10.3 bar (0 - 150 p.s.i.).........
Fluid Pressure Range 0 - 517.2 bar (0 - 7500 p.s.i.)...........
Cycles / Minute Rec’d @ Working Flow 80..
Displacement In
3
Per Cycle 0.300.......
Volume / Cycle 6.55 ml (0.22 oz.).................
Maximum Delivery / Minute 4.1kg(9lbs).......
Noise Level @ 100 p.s.i. 85
..........
Accessories Available 61113 Wall Mount Bracket.......
66073
-1 Air Line Connection Kit
The pumpsound pressure levelhas been updated to an Equivalent Continuous Sound
Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four
microphone locations.
GENERAL DESCRIPTION
The model 559Xserieschop-check grease pump is intended to be used
primarily forgreasedelivery systems. Itusescarbon steel andother ma-
terials which make it compatible with most petroleum based lubrication
products.
NOTE: If this pump was purchased separately (not part of a system),
consult your sales representative for compatible dispensing accesso-
ries which will best match the application. All accessories must be able
to withstand the maximum pressure developed by the pump.
PUMP DATA
MODEL 559X
MODEL “A” (mm) “B” (mm) WEIGHT (kg)
5596 27-3/4” (704) 16-9/16” (421) 15 (6.8)
5597 30-1/2” (774) 19-5/16” (490) 15.9 (7.2)
5598 38-7/16” (976) 27-1/4” (692) 18.3 (8.3)
5599 48” (1219) 36-13/16” (935) 21.2 (9.6)
NOTE: Dimensions are shown in inches and (mm), supplied for reference only and are typically
rounded up to the nearest 1/16 inch.
Figure 1
Air Inlet (female)
(1/4 - 18 N.P.T.F. - 1)
Material Outlet (female)
(3/8 - 18 N.P.T.F. - 1)
2” N.P.S.M. Bung Adapter
8 mm (5/16”) Thru hole
“B”
“A”
1-1/4”
(31.8 mm)
IMPORTANT
This is one of two documents which support the pump. Replace-
ment copies of these forms are available upon request.
= 559X Model Operator’s Manual (pn 97999-1033)
- S- General Information Lubrication Piston Pumps (pn 97999
WARNING
READ THE GENERAL INFORMATION MANUAL
INCLUDEDFORADDITIONALOPERATING ANDSAFETYPRE-
CAUTIONS AND OTHER IMPORTANT INFORMATION.
-
632
db (A)
Testedwith95086 mufflerassemblyinstalled.
1
1
632
-624).
624).