Filter
Top Products
17
Fish ID. There are three selections available: OFF, ID+ ON, and ADJUST. The fac-
tory setting is ID+ ON. With Fish ID OFF, sonar returns are displayed as “raw”
information. There is no interpretation made by the unit. Selecting ID OFF also
disables the fish alarm.
ID+ ON enables the Tracker unit to interpret the raw sonar data and, using
a variety of techniques, depict appropriate target returns as one of three
different size fish symbols. Further identification shows whether the fish is
in the wide or narrow beam. The Tracker unit also displays the depth
beneath the surface with the corresponding fish symbol.
Selecting Adjust and making incremental changes enhances the fishfinder’s
ability to identify sonar returns as fish symbols.
Increasing the value to a number greater than
zero shows more fish symbols on-screen. In
this case smaller sonar returns will be depicted
as fish symbols. This is useful for identifying
many smaller sonar returns (such as baitfish)
as fish symbols.
Decreasing the value to a number less than zero
shows fewer fish symbols on-screen. In this case
smaller sonar returns are disregarded. This is
useful for eliminating many small sonar returns
when seeking larger species of fish.
The Tracker unit remembers this selection
even when the unit is powered off.
Numeral Size. Two options are available: BIG
and SMALL. The factory setting is BIG. With
this setting, the
digital depth and
speed and temp
numerals are
drawn large
enough to be
read from across
USING THE TRACKER UNIT
MENU FUNCTIONS
Raw Sonar ID+ On