Kenmore 153.31206 Fish Finder User Manual


 
Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi-
als,depending on your type of installation.
/
ilI
WATER HEATER INSTALLA-
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR
I/2" THREADED OR COPPER
PLUMBING
WATER HEAT*:R HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERMAL SYPHONING
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE
IN 2 GALLON AND $ GALLON CAPACITY
THROUGH LOCAL SEARS SERVICE
CENTERS
20" DIAMETER DRAIN PAN
FOR WATER HEATERS IS" IN
DIAMETER AND UNDER
28" DIAMETER DRAIN PAN FOR
WATER HEATERS 26" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Sears store.
Pipe Wrench (2)
Screwdriver
6 Foot Tape or Folding Rule
Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PIPE
WRENCH
PHILLIPS SCREWDRIVER
PIPE DOPE(SQUEEZE TUBE)
ROLL OF TEFLON TAPE DRILL
(Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
HACKSAW
\
3/4" WIRE BRUSH
112"WIRE BRUSH
ROLL OFLEAD FREE PROPANETORCH
SOFTSOLDER
ROLL OFEMERY SOLDER TUBING
CLOTH FLUX CUTTER