22
■ Receiving
When you receive the correct ID and Intermediate
codes, squelch turns OFF and you will hear the call.
If a message code is also received, the message
appears on the display
• “CALL” appears on the display and the LED indicator
flashes orange.
• When you receive a call with your ID code, “C”
appears on the display (i.e.- C 12345).
• When you receive a call wih your Group code, “A”
appears on the display (i.e.- A 12345).
• When no message is received, “NO DATA” appears on
the display.
• You can clear a message by pressing any key other
than the key programmed as Lamp.
• To mute the speaker after squelch turns OFF, press
the key programmed as Monitor.
• Your dealer can program squelch to automatically turn
back ON after a specific time period elapses.
• If Transpond for Selective Call is programmed, an
acknowledgment signal is returned to the calling
station. Transpond does not function when you are
called with a Group code. Transpond for Selective
Call can send an alert tone, a transceiver ID code, or a
code stored in memory location 1.
• If Tone Alert for Selective Call is programmed, an alert
tone will sound when the correct code is received.