Kenwood TK-3202 Marine Radio User Manual


 
4
1 Plug the AC adaptor cable into
the adaptor jack located on the
rear of the charger.
2 Plug the AC adaptor into an AC
outlet.
3 Slide the Ni-MH battery pack or
transceiver with a NiMH battery
pack into the charger.
Make sure the battery pack
terminals are in contact with
the charger terminals by
aligning the grooves of the
battery pack with the tabs of
the charger.
The charger LED lights red
and charging begins.
4 When charging is completed, the
indicator lights green. Remove
the battery pack or the transceiver
from the charger.
It takes approximately 3 hours
to charge the battery pack.
When the charger will not be
used for a long time, unplug
the AC adapter from the AC
outlet.