Filter
Top Products
11
ADVANCED OPERATIONS
The following functions are programmable by your dealer, as
described on page 9.
AUTODIAL
Press and hold the PTT switch, then press the key
programmed as Autodial to transmit the stored DTMF code.
Release the Autodial key, then speak into the microphone
while still pressing the PTT switch to call the other party.
KEY LOCK
Press and hold the key programmed as Key Lock for
1 second to lock/ unlock the transceiver keys. The following
keys/ functions can still be used when Key Lock is active:
Autodial, Key Lock, Monitor, Monitor Momentary, PTT,
Squelch Off, Squelch Off Momentary, and Volume.
If the key is programmed “with backup”, when the transceiver
power is turned OFF and then ON again, the keys remain
locked. Otherwise, when the transceiver power is turned OFF
and then ON again, the Key Lock function will be cancelled.