Filter
Top Products
19
■ Reviewing Messages in the Stack Memory
1
Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
• The last received message is displayed.
2 Press / to select the desired message.
• Message types are identified as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
for 1 second to cycle the display
information as follows:
ID Name > Status/Short Message > Channel > Time Stamp
3 Press to return to normal operation.
• To delete the selected message, press or #. To
confirm the deletion, press or .
• To delete all messages, press and hold
or # for
1 second. To confirm the deletion, press or .
Short/long meSSAgeS
Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask
your dealer for details.
gpS report
To send your location data, you must first connect a GPS unit to
the transceiver. Once connected, press the key programmed as
Send the GPS data, or access the Menu {page 12}. If set up
by your dealer, GPS data may be automatically transmitted at a
preset time interval.