Kenwood TK-5320 Marine Radio User Manual


 
28
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
voice recorder
The voice recorder allows you to record conversations and
create voice memos.
Auto Recording
If activated, the auto recorder will continuously record all
transmitted and received signals. The recording storage
area retains only the last 30 seconds of recording.
Voice Memos
To record a voice memo for later playback:
1 Press the key programmed as Voice Memo, or access
the Menu {page 12}.
The duration of recording memory will appear on the
display and begin counting down.
2 Speak into the microphone to record your memo.
3 Press to end the recording and store it in memory.
If the memory becomes full, recording will stop and the
voice memo will be stored in memory.
Auto Reply Message
You can set the transceiver to automatically respond to
Individual Calls while using FleetSync.
1 Press the key programmed as Auto Reply Message to
enter Auto Reply Message mode.
2 When you receive an Individual Call, the transceiver will
send an automatic response to the caller after
3 seconds, and “GREETING” appears on the display.
If you are available to receive the call, press any key to
cancel the auto response.