Filter
Top Products
Model: S88907 www.lacrossetechnology.com/support Page | 5
STEP 3:
Ensure that the transmitter is within 10 feet of the weather station.
Remove battery cover from transmitter. Slide the battery cover down
and lift off the front.
Insert two new AA batteries into the TX141TH-Bv2 transmitter.
Observe the correct polarity.
Within three minutes, the Weather station will show readings in the
remote temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
Button Functions
▼ (Down) Button
Setting-
Press to decrease values during setting.
Hold 2 seconds to quickly adjust values.
Default Time Display-
Press to display minimum temperature/humidity.
Hold 2 seconds to clear minimum temperature/humidity memory.
Temperature Alert-
Press to disarm alerts
TIME SET Button
Default Time Display-
Press to start or stop a WWVB time signal search
Hold for 3 seconds to set time/calendar, etc.
SNOOZE/LIGHT (HI-LOW-OFF) Button
Default Time Display-
Press to change the LCD backlight brightness. HI/LOW/OFF
Press to activate backlight for 10 seconds.(without adaptor)
Time Alarm-
Press to activate the snooze function when alarming
HEAT/DEW/SENSOR SEARCH button
Default Time Display-
Press once to view Heat Index.
Press twice to view Dew Point.
Hold to search for Remote sensor.
The weather station
has 5 buttons up the
right side and 2
buttons on the front.