Filter
Top Products
ENGLISH
30
USER SETTINGS
PBP
1
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2
Go to PBP by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
5
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > PBP Description
PBP Displays the screens of two input modes on one monitor.
PBP Connection
Sub screen (Right)
DVI HDMI 1 HDMI 2 DisplayPort
Main screen
(Left)
DVI - O X O
HDMI 1 O - O O
HDMI 2 X O - O
DisplayPort O O O -
Input Main Selects the video signal input of the main screen.
Sub Selects the video signal input of the sub screen.
Audio Changes the audio output in PBP mode.
Swap Toggles between the main screen and sub screen in PBP mode.
Sub Full Converts the sub screen in PBP mode to wide screen.
Ratio Adjusts the aspect ratio of the main screen or sub screen.
Main Wide Displays the video to fit the PBP screen, regardless of the video
signal input.
Original Displays the video in the aspect ratio of the video signal input on
the PBP screen.
Sub Wide Displays the video to fit the PBP screen, regardless of the video
signal input.
Original Displays the video in the aspect ratio of the video signal input on
the PBP screen.
y
When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The
Main/Sub options for Ratio become disabled if there is no signal.
y
When the monitor is turned off, the PBP mode will be disabled.
y
When Input is switched, the PBP mode will be disabled.
NOTE
PBP
Easy control
PBP Off
>
Input
>
Function
Audio HDMI
>
Swap
PBP
Sub Full
Ratio
>
Screen
Settings
Reset
PBP Preview
DVI-D
▲/▼: Move
/ ►: OK
◄: Back