LG Electronics 42WL30MS Marine Instruments User Manual


  Open as PDF
of 94
 
87
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
43. Tile V Position (Command: d f)
ToadjusttheTileVerticalposition.
*ThisfunctionisavailableonlywhentheNatural
optionoftheTileModeissettoOffwhiletheTile
ModesettoOn.
Transmission
[d][f][][SetID][][Data][Cr]
Data 0to32:0(Bottom)to50(Top)
*Bottom/TopvaluesdependonTileVerticalsize.
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[f][][SetID][][OK/NG][Data][x]
44. Tile H Size (Command: d g)
ToadjusttheTileHorizontalSize.
*SetTileHPositionto0x32beforesettingTileH
Size.
*ThisfunctionisavailableonlywhentheNatural
optionoftheTileModeissettoOffwhiletheTile
ModesettoOn.
Transmission
[d][g][][SetID][][Data][Cr]
Data 00to32:0to50
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[g][][SetID][][OK/NG][Data][x]
45. Tile V Size (Command: d h)
ToadjusttheTileVerticalsize.
*SetTileVPositionto0x00beforesettingTileV
Size.
*ThisfunctionisavailableonlywhentheNatural
optionoftheTileModeissettoOffwhiletheTile
ModesettoOn.
Transmission
[d][h][][SetID][][Data][Cr]
Data 00to32:0to50
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[h][][SetID][][OK/NG][Data][x]
46. Natural Mode (In Tile Mode) (Command : d j)
Todisplaytheimagenaturally,thepartoftheimage
thatwouldnormallybedisplayedinthegapbetween
themonitorsisomitted.
Transmission
[d][j][][SetID][][Data][Cr]
Data 00:Off
01:On
Acknowledgement
[j][][SetID][][OK/NG][Data][x]
47. DPM Select (Command: f j)
TosettheDPM(DisplayPowerManagement)
function.
Transmission
[f][j][][SetID][][Data][Cr]
Data 00:Off
01:On
*Datasettingsmayvarydependingonyourmodel
asbelow.
Data 00:Off
01:5sec.
02:10sec.
03:15sec.
04:1min.
05:3min.
06:5min.
07:10min.
Acknowledgement
[j][][SetID][][OK/NG][Data][x]
48. FAN Control (Command : d o)
TosettheFanmode.
Transmission
[d][o][][SetID][][Data][Cr]
Data 00:Auto
01:On
02:Manual
03:Off
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[o][][SetID][][OK/NG][Data][x]
 previous next