LG Electronics 60WL30MS Marine Instruments User Manual


  Open as PDF
of 94
 
86
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
37. Fail Over Input Select (Command: m j)
Toselecttheinputsourceforautoswitch.
*Thiscommandisonlyavailablewhenthefailover
(auto)modeissettoCustom.
Transmission
[m][j][][SetID][][Data1][][Data2][][Data3][Cr]
[][Data4][][Data5][Cr]
Data 1to5(Priority1to5)
60:RGB
 70:DVI-D
90:HDMI(HDMI1)
C0:DisplayPort
91:HDMI2/SDI
*Thenumberofdataitemsdiffersdependingonthe
model.
Acknowledgement
[j][][SetID][][OK/NG][Data1][Data2][Data3][Data4]
[][Data5][x]
38. Reset (Command: f k)
ToexecutethePicture,Screen,AudioandFactory
resetfunction.
(ScreenResetcanonlybeperformedinRGBinput
mode.)
Transmission
[f][k][][SetID][][Data][Cr]
Data 00:PictureReset
01:ScreenReset
02:FactoryReset
03:AudioReset
Acknowledgement
[k][][SetID][][OK/NG][Data][x]
39. Tile Mode (Command: d d)
TosetaTileModeandTileColumn/Rowvalues.
Transmission
[d][d][][SetID][][Data][Cr]
Data 00toFF:1stbyte-TileRow
2ndbyte-TileColumn
*00,01,10,11meansTileModeOff
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[d][][SetID][][OK/NG][Data][x]
40. Tile Mode Check (Command: d z)
TocheckTileModestatus.
Transmission
[d][z][][SetID][][Data][Cr]
Data FF:CheckTileModestatus.
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[z][][SetID][][OK/NG][Data1][Data2][Data3][x]
Data1 00:TileModeOff
01:TileModeOn
Data2 00to0F:TileRow
Data3 00to0F:TileColumn
41. Tile ID (Command: d i)
TosetTileID.
Transmission
[d][i][][SetID][][Data][Cr]
Data 01toE1:TileID01to225**
FF:CheckTileID
**Datacouldnotbesetover(TileColumn)x(Tile
Row).
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[i][][SetID][][OK/NG][Data][x]
*NGwillbereturnifdataisover(TileColumn)x(Tile
Row),except0xFF.
42. Tile H Position (Command: d e)
ToadjusttheTileHorizontalposition.
*ThisfunctionisavailableonlywhentheNatural
optionoftheTileModeissettoOffwhiletheTile
ModesettoOn.
Transmission
[d][e][][SetID][][Data][Cr]
Data 00to32:-50(Left)to0(Right)
*Left/RightvaluesdependonTileHsize.
**Itmaynotbesupporteddependingonthemodel.
Acknowledgement
[e][][SetID][][OK/NG][Data][x]
 previous next