LG Electronics M4716C Marine Instruments User Manual


 
13
Using RGB Input
Using AV Input
To use different set connected to each other, connect one end of the signal input cable
(15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other
end to the RGB IN connector of other set.
Connecting to External Devices
Set 1
Set 1
Set 2
Set 2
Set 3
Set 3
Set 4
15-pin D-Sub Signal Cable
PC
Daisy Chaining Set
Video
PC
BNC Cable
(not included)
Audio Cable
(not included)
The number of set that can be connected to one output may vary depending on signal
status and cable loss. If the signal status is good, and there is no cable loss, it is pos-
sible to connect up to 9 set. If you want to connect more than nine, a distributor is
recommended.
Note
B.
A.