Filter
Top Products
31
User Menus
Move
OPTION
OK
Language : English
Input Label
Key Lock : Off
Set ID : Off
ISM Method : Normal
DPM Select : On
Power Indicator : ON
Logo Light : ON
▼
Language : English
ꔋ
Language
Chooses the language in which the control names are displayed.
Input Label
Selects a label for each input source.
Key Lock
Use ▼▲ to select On or Off. The set can be set up so that it can only be used with the remote control.
This feature can prevent unauthorized viewing.
To lock OSD screen adjustment, set the Key Lock tab to the 'On' position.
To unlock it, do the following:
Push MENU on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each set when several set are connected
for display. Specify the number (0 to 99) using ◄ ► and exit. Use the assigned Set ID to individually
control each set using the Set Control Program.
ISM Method
Leaving a fixed image on the screen for a long time may cause image burn-in. To use the set for a
long period of time, use a screen saver on the PC or utilize the residual image prevention function on
the set, and when the set is not used, turn the power off. Burn-in and related problems are not covered
by the warranty on this set.
Normal: Leave on normal if you don't foresee image burn in being a problem.
Orbiter: May help prevent ghost images. However, it is best not to allow any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen will move every 2
minutes.
Inversion: This function inverts the panel color of the screen. The panel color is automatically
inverted every 30 minutes.
White wash: White wash fills the screen with solid white. This helps removes permanent images
burned into the screen. A permanent image may be impossible to clear entirely with
white wash.
Selecting Options