Filter
Top Products
71
To adjust sensitivity in auto mode:
1. Press
MENU|ENT.
2. The unit asks which you wish to adjust. Press ← or→ to select the
one you want |
ENT.
3. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
EXIT. (When you reach the maximum or minimum limit, a tone sounds.)
The Split Frequency Sonar Chart page allows you to adjust
sensitivity separately for each window.
Digital Data/Chart
This mode shows the chart on the right side of the screen. The left side has
six large digital boxes or windows containing: Water Depth; Water Speed
(from an optional speed sensor); Water Distance (distance traveled or log, it
also requires a speed sensor); Surface Water Temperature; Temperature #2
and Voltage used. (Note: Temperature #2 requires an additional optional
temperature sensor.)
Digital Data/Chart