Filter
Top Products
73
change. When the selected window title bar flashes, press
ENT|↑ or ↓
to select data type|
ENT. Repeat these steps until you're finished cus-
tomizing, then press
EXIT to return to the Sonar Page.
FlashGraf
The FlashGraf sonar page option represents a flasher style sonar com-
bined with a scrolling chart. A circular dial shows all returning echoes
at a high screen refresh rate.
It uses the Grayline feature to show weaker targets as shades of gray.
The bottom depth is also shown as a black bar across the outer circle.
There is also a narrow chart display on the left of the screen.
FlashGraf page.
Sonar Simulator
This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, you will see [Simulator Mode] in the Sonar Page title
bar. To use the simulator:
1. From the Sonar Page, press
MENU|MENU|↓ to SONAR SIMULATOR|ENT.
2. Turn off Sonar Simulator by pressing
MENU|MENU|↓ to SONAR
SIMULATOR|ENT|EXIT.
NOTE:
If you turn on your unit before attaching a transducer, it may enter
a demo mode. The words "demo mode" flash on the bottom of the
screen and a sonar chart plays much like the simulator. Unlike the
simulator, the demo mode is for demonstration only, and will auto-
matically stop as soon as you turn on the unit with a transducer at-
tached. The simulator will continue to function normally.
Bottom signal
Surface clutter
Fish signal,
approximately
16 feet