Filter
Top Products
14
TargetTrack™
The X-45 has the unique capability to "see" targets not only straight down,
but also to the right and left, thanks to the optional BroadView™ transducer
(not included). This transducer has three elements: left, right, and down.
The X-45 uses all three elements to display targets between the surface
and the bottom. Targets are shown as Fish ID symbols. This feature also
shows the depth of the target directly above the fish symbol. In the screen
shown below right, there is one symbol from the right element at 22 feet,
one from the left element at 29 feet, and one from the center element at 16
feet. The TargetTrack feature identifies fish symbols coming from the right
element with a "R" in front of the symbol's depth. A "L" identifies symbols
from the left element. No letter identifies fish symbols from the center
element. The bottom signal and the digital depth display are read from the
center element only.
To turn the TargetTrack feature off, simply press the MENU key until its
menu appears as shown below, then press the down arrow key.