Filter
Top Products
17
DIG 2 (Digital #2)
The digital depth display shows at the top of
this screen in very large digits. The digital
temperature, speed, and log shows beneath
the depth. The log starts counting when the
X-45 is first turned on. When the X-45 is
turned off, the log is reset to zero.
ALARMS
FISH ALARM
The Fish Alarm sounds a tone when a fish symbol appears on the screen.
To use the fish alarm, press the menu key until the “FISH ALARM” menu
appears on the screen. Now press the up
arrow key to turn the alarm on. Repeat the
above steps to turn the fish alarm off. (Note:
If the Fish ID feature is off, it will be turned on
when you turn the fish alarm on.)
DEPTH ALARMS
The depth alarms are triggered only by the
bottom signal. No other echoes will activate
these alarms. The depth alarms consist of a
shallow and deep alarm. The shallow alarm
sounds an alarm tone when the bottom goes
DIG 1 (Digital #1)
This is the first digital only screen. It shows
the digital depth display at the top of the
screen in very large numbers. The shallow
and deep alarm settings are displayed be-
neath the digital depth. No chart shows on
this screen.