Filter
Top Products
29
Display
The lights will flash for about 10 seconds when the unit is turned on.
The backlight menu will appear on the screen. Use the
ARROW keys to
turn the backlight on or off. Press
PWR to clear the menu from the
screen.
The unit will show the Full Chart Page or mode. The Fish I.D. fish
symbol feature is on by default. The depth range is displayed as the
upper and lower limit on the left side of the screen. In the following
figure, the screen shows a depth range from 0 to 80 feet and the bottom
depth is 36.9 feet, shown by the digital sonar. The water temperature is
34.5° F.
Opening screen, Full Chart page, or mode. The factory default setting
has the Fish I.D. (fish symbols) turned on.
Full Chart
The unit's default page, Full Chart shows all echoes scrolling across the
full screen. The bottom signal scrolls across the screen from right to
left. The line at the top of the screen represents the surface. The bottom
depth — determined by the digital sonar — shows in the upper left
corner.
If the transducer with a built-in temperature sensor is connected, a
digital display for water temperature also will be shown. This tempera-
ture display can be turned on and off.
Fish symbols
Grayline
Bottom signal
Digital depth
Depth range
at bottom of
de
p
th scale
Surface signal
Water Temp
Structure
or cove
r