Filter
Top Products
PROPELLER INSTALLATION INSTRUCTIONS
90-830296005 FEBRUARY 2010 Page 3 / 7
4. The drive sleeve must be locked between the forward thrust washer and aft adapter.
a - Flo‑Torq III propellers
b - Flo‑Torq IV propellers
Description Nm lb‑in. lb‑ft
Propeller nut 74.6 55
5. Rotate the propeller to verify interference or binding does not exist between the gear housing and the propeller.
NOTE: A small amount of rotation play and forward aft play is normal.
Flo‑Torq Reflex Drive Hub Installation
Installing the Drive Sleeve into the Propeller
1. Assemble the drive sleeve with the aft drive sleeve. Ensure there is no gap between the drive sleeve and the aft drive sleeve.
43667
2. Insert the drive sleeve assembly onto the propeller and push the drive sleeve assembly onto the propeller.
43670
13340
a
b