Filter
Top Products
Green and Red LED
When the red LED is on, this indicates that the
laser is on. When the green LED flashes on,
the scanner has read a bar code successfully.
When the green light turns off, communica-
tion to the host is complete. The green LED
blinks while the scanner is waking up from an
IR sensor timeout. The LED’s are also used
as diagnostic indicators and mode indicators.
Refer to pages 10-12 for details.
Output Window
Laser light emits from this aperture.
º
Coil Cable
This cable is terminated with a 10-pin modular connector, which attaches to
the MCA951. The Keyboard Wedge unit has a “Y” coil cable terminated with
a 5-pin female on one end, a 6-pin male and a 4-pin locking connector for
power input (power jumper). An adaptor is included with a 5-pin male DIN
on one end and a 6-pin female mini DIN on the other to mate to a specific
keyboard. Refer to Appendix C page 36 for pin assignments.
Adjustable Stand
Designed to provide an adequate
distance for scanning between the
scanner face and counter at all
times. When fully tilted, the face
of the scanner remains a full five
inches from the counter. Refer to
page 8 for available kits.
»
9
Scanner Parts